How to resolve the Picus NxT Error message: “Failed to find zero position. Press OK to retry.” Step 1: Try the Simple Fix Step 2: Perform a Reset (If Step 1 Doesn’t Work) Step 3: If the Picus NxT Error Persists In this case, you may need to send the device a service technician for
Read More… from Sartorius Picus NxT Error: “Failed to find zero position. Press OK to retry”
The process of removing, replacing, and reinstalling the piston assembly for the Biohit/Sartorius mLINE, eLINE, Proline Plus, Tacta, Picus, and Picus NxT single channel pipettes requires great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should
Use these instructions to access internal components such as the battery, machinery, and main board on the Sartorius Picus. Tools Required: Replacement Parts: Disassembly Assembly
Read More… from Sartorius Picus: Handle Assembly/Disassembly
mLINE Calibration Instructions: ATTENTION: Performing a calibration adjustment on any pipette should always be the last option, never the first. Performing a calibration adjustment first may mask underlying pipette performance issues that could affect both the short- and long-term health of your pipette. This could lead to costly repairs and part(s) replacement, and possibly the
Read More… from How to Adjust the Calibration for a Sartorius mLINE Single Channel Pipette
Replace a mLINE Tip Ejector: Step 1 Disassembly: Gently pry and lift off the colored plunger button cap from the mLINE pipette and lay aside for reassembly later on. Shop all colors here. Step 2: Gently push up on the tip ejector button with your thumb to loosen/detach the black or blue colored body
Read More… from How to Replace the Tip Ejector Mechanism on a Sartorius mLINE Single Channel Pipette
Sartorius mLINE 5000uL Piston Cleaning & Preventive Maintenance Recommended Tools and Parts: Note: As Preventive Maintenance (PM) is performed, there may be a need to replace one or more of the following parts based on pipette part condition and wear and tear. Step 1: Loosen the outer shaft sleeve by carefully unscrewing it. Once
Read More… from Sartorius mLINE 5000uL Single Channel Piston Cleaning & Preventive Maintenance
How to replace a mLINE volume display window: Required Tools and Parts: Sartorius Calibration Tool – SA 726203 Small flat head screw driver mLINE Volume Display Windows – Shop all volumes here Volume Lock Button (Counter Release Nut) – SA LH-726221 Note: Only replace the mLINE volume display window if it is cracked or if
Read More… from Replacing a Damaged or Missing Sartorius mLINE Volume Display Window
Production of any material contained herein without the written permission of Pipette Supplies, Inc. is prohibited. All OEM names and models are shown or listed for compatibility and descriptive purposes only and are trademarks and property of their respective owners.
Our Story