The process of removing, replacing, and reinstalling the Pipet-Lite XLS push rod ejector assembly requires great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should they pop/fly out during disassembly. Pipette damage and lost parts may
Read More… from Push Rod Ejector Assembly Replacement for the Pipet-Lite XLS/XLS+
Xplorer Battery Replacement Overview: The Eppendorf Xplorer uses a 3.7V, 750mAh Lithium Polymer battery that provides many hours of reliable use and operation. In most cases, the battery will provide between 300-500 complete recharging cycles before replacement is needed. This equates to roughly 3-5 years with proper use. With this battery, the mfg./install date was
Read More… from Eppendorf Xplorer Battery Replacement Instructions
Mentioned in this Pipetman Return Spring post: Step 1: Press and hold the tip ejector button in the down position (figure 1.0) while detaching the tip ejector arm from the pipette body (figure 2.0). Figure 2.0 shows the tip ejector arm removed. Step 2: Carefully unscrew the coupling nut and shaft (figure 1.0) from the
Read More… from How to Replace the Return/Stroke Spring on a Gilson Pipetman P1000, P1000N, P1000F
The process of removing, replacing, and reinstalling the F1 tip ejector pusher upper and lower slide mechanisms require great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should they pop/fly out during disassembly. Pipette damage and
Read More… from Finnpipette F1 and F2 Tip Ejector Mechanism Replacement
The process of removing, replacing, and reinstalling the Rainin Pipet-Lite/Pipet-Lite XLS/PIpet-Lite XLS+ Counter Assembly requires great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should they pop/fly out during disassembly. Pipette damage and lost parts may
Read More… from Rainin Pipet Lite XLS/XLS+ and Pipet-Lite Models: Counter Assembly Replacement
The process of removing, replacing, and reinstalling the Pipetman Push Rod Ejector Assembly requires great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should they pop/fly out during disassembly. Pipette damage and lost parts may occur
Read More… from Gilson Pipetman Push Rod Ejector Assembly Replacement
The process of removing, replacing, and reinstalling the Rainin Push Rod Ejector Assembly requires great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should they pop/fly out during disassembly. Pipette damage and lost parts may occur
How to Remove and Install a New Counter Assembly for Gilson Pipetman with the Counter Disassembly/Assembly Tool In this post:Counter Removal Tool: PS 10002Gilson Counter AssembliesPipetman Classic Replacement Parts: Single Channel NOTE: These instructions are not recommended for the Pipetman L. Disassembly Step 1: Press and hold down the white colored tip ejector button. This
Read More… from Counter Assembly Instructions for Gilson Pipetman / Rainin Classic
How to Replace the Volume Catch on an Eppendorf Reference 2 Pipette The process of replacing the left and right-side volume catch, internal springs, and tab levers is a careful process that could damage the pipette if attention to detail is not maintained. Volume catch replacement requires a high level of patience and steady hands.
Drummond repair videos can be found on Drummond’s Resource page. Find Drummond repair parts here! Videos include: Portable Pipet-Aid Nosepiece Filter Replacement – Part 1 & 2 Portable Pipet-Aid Battery Replacement – Part 1, 2, & 3 Pipet-Aid XP O-Rings Replacement Pipet-Aid XP Filter Replacement Pipet-Aid XP Nosepiece Filter Replacement – Part 1 & 2
Production of any material contained herein without the written permission of Pipette Supplies, Inc. is prohibited. All OEM names and models are shown or listed for compatibility and descriptive purposes only and are trademarks and property of their respective owners.
Our Story
