The process of removing, replacing, and reinstalling the valve assemblies & Discharge Tubes on the BrandTech Dispensette S, S Organic, and S Trace requires great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should they fly
Read More… from BrandTech Dispensette S – Valve/Discharge Tube Replacement
The process of disassembly, removing, replacing, and reinstalling parts, as well as, performing preventive maintenance (PM) on the Brand Transferpette S single channel pipette require great care. A high attention to detail, patience, and steady hands are required. Please dedicate a good work area with good lighting and space where small parts can be located
Read More… from Preventative Maintenance: Transferpette S Single Channel (2uL-1000uL)
There have been many versions of the BrandTech Transferpette S over the years. Use this page to find the right parts for your pipette! Shop Spare Parts Here:Transferpette S Single ChannelTransferpette S Multichannel To determine the year your pipette was manufactured, see BrandTech Serial Number Format. Transferpette S Single Channel (pre-2020) NOTE: If the pipette
The old BrandTech Transferpette (Mechanical) pipette was discontinued in 2015. Most replacement parts, including nose cones, are no longer available. You can find all available parts here: Transferpette Multichannel Mechanical Multichannel Transferpettes with serial numbers – 01K (Jan 2012) or newer can use nose cones for Transferpette S: **Note that unless the pipette has already
Read More… from BrandTech Transferpette Multichannel Nose Cone Part Numbers
If your pipette was manufactured prior to mid-November 2015: First two digits are the MONTH of manufacture (i.e., 01-12)Letter indicates YEAR of manufacture as shown below:BrandTech Serial Number Example: 01A1234 A = 2003B = 2004C = 2005D = 2006E = 2007F = 2008G = 2009H = 2010J = 2011K = 2012L = 2013M = 2014N
Transferpette Adjustment Knob Installation: Link to product page: BT 9481 Take micrometer window by sliding it (don’t unscrew it). Then remove underneath gray cover. On the other end of the micrometer, there is a locking system. Leave the red clip on. Remove the small metal piece while holding the micrometer numbers so they don’t move.
Read More… from Transferpette Adjustment Knob Installation, Item # BT 9481
Production of any material contained herein without the written permission of Pipette Supplies, Inc. is prohibited. All OEM names and models are shown or listed for compatibility and descriptive purposes only and are trademarks and property of their respective owners.
Our Story