The process of removing, replacing, and reinstalling the windows for ThermoFisher / Finnpipette pipettes requires great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should they pop/fly out during disassembly. Pipette damage and lost parts may
Read More… from ThermoFisher/Finnpipette – Window Replacement
The process of disassembly, removing, replacing, and reinstalling parts, as well as, performing preventive maintenance (PM) on the Fisherbrand Elite single channel pipette requires great care. A high attention to detail, patience, and steady hands are required. Please dedicate a good work area with good lighting and space where small parts can be located should
Read More… from Preventive Maintenance: Fisherbrand Elite Single Channel (2uL-1000uL)
The process of removing, replacing, and reinstalling the F1 tip ejector sleeve requires great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should they pop/fly out during disassembly. Pipette damage and lost parts may occur if
Read More… from Finnpipette F1 and F2 Tip Ejector Sleeve Replacement
Novus Error Codes – Decoded! Error Code Description 11 Eeprom checksum-problem. In case it repeats, change main CB assy 12 Motor home positioning error (stuck module, failure in Opto CB assy or broken main CB assy) 13 Software bug 14 Pipette overheated 15 Battery low or battery empty or battery disconnected (SW version 4.0) 16
The process of removing, replacing, and reinstalling the F1 tip ejector pusher upper and lower slide mechanisms require great care, a high attention to detail, patience, and steady hands. Please dedicate a good work area with good lighting and space where small parts can be located should they pop/fly out during disassembly. Pipette damage and
Read More… from Finnpipette F1 and F2 Tip Ejector Mechanism Replacement
In this post: Finnpipette Digital Tip Ejector Pusher Mechanism: Based on imprinted volume size on mechanism. Does not include cog wheel or spring. Shop tip ejector pushers.Tip Ejector Spring – TS 1131820Tip Ejector Button – TS 10593000Cog Wheel – TS 10593060 (The Finnpipette Digital Single Channel is the same pipette as the Finnpipette Model 4500
Production of any material contained herein without the written permission of Pipette Supplies, Inc. is prohibited. All OEM names and models are shown or listed for compatibility and descriptive purposes only and are trademarks and property of their respective owners.
Our Story